Publication Beamlines Strategic Pillar
Ge, N.; Banerjee, R.; Muirhead, D.; Lee, J.; Liu, H. et al. (2019). Membrane dehydration with increasing current density at high inlet gas relative humidity in polymer electrolyte membrane fuel cells. Journal of Power Sources 422, 163-174. 10.1016/j.jpowsour.2019.03.001. BMIT-BM Materials
Ge, N.; Chevalier, S.; Muirhead, D.; Banerjee, R.; Lee, J. et al. (2019). Detecting cathode corrosion in polymer electrolyte membrane fuel cells in dead-ended anode mode via alternating current impedance. Journal of Power Sources 439, 227089. 10.1016/j.jpowsour.2019.227089. BMIT-BM Materials
Ge, N.; Shrestha, P.; Balakrishnan, M.; Ouellette, D.; Wong, A.K.C. et al. (2019). Resolving the gas diffusion layer substrate land and channel region contributions to the oxygen transport resistance of a partially-saturated substrate. Electrochimica Acta 328, 135001. 10.1016/j.electacta.2019.135001. BMIT-BM Materials
Lee, J.; Liu, H.; George, M.G.; Banerjee, R.; Ge, N. et al. (2019). Microporous layer to carbon fibre substrate interface impact on polymer electrolyte membrane fuel cell performance. Journal of Power Sources 422, 113-121. 10.1016/j.jpowsour.2019.02.099. BMIT-BM Materials
Lo, Calvin; Sano, Tomoko; Hogan, James D. (2019). Microstructural and mechanical characterization of variability in porous advanced ceramics using X-ray computed tomography and digital image correlation. Materials Characterization 158, 109929. 10.1016/j.matchar.2019.109929. BMIT-BM Materials
Shrestha, Pranay; Ouellette, David; Lee, Jongmin; Ge, Nan; Wong, Andrew Kai Cheung et al. (2019). Graded Microporous Layers for Enhanced Capillary‐Driven Liquid Water Removal in Polymer Electrolyte Membrane Fuel Cells. Advanced Materials Interfaces 6(21) , 1901157 (1-10). 10.1002/admi.201901157. BMIT-BM Materials
Wong, A.K.C.; Ge, N.; Shrestha, P.; Liu, H.; Fahy, K. et al. (2019). Polytetrafluoroethylene content in standalone microporous layers: Tradeoff between membrane hydration and mass transport losses in polymer electrolyte membrane fuel cells. Applied Energy 240, 549-560. 10.1016/j.apenergy.2019.02.037. BMIT-BM Materials
Abedi, Ali; Cheng, He; Dalai, Ajay K. (2018). Effects of Natural Additives on the Properties of Sawdust Fuel Pellets. Energy & Fuels 32(2) , 1863-1873. 10.1021/acs.energyfuels.7b03663. BMIT-BM Materials
Banerjee, R.; Ge, N.; Han, C.; Lee, J.; George, M.G. et al. (2018). Identifying in operando changes in membrane hydration in polymer electrolyte membrane fuel cells using synchrotron X-ray radiography. International Journal of Hydrogen Energy 43(20) , 9757-9769. 10.1016/j.ijhydene.2018.03.224. BMIT-BM Materials
Liu, Hang; George, Michael G.; Ge, Nan; Muirhead, Daniel; Shrestha, Pranay et al. (2018). Microporous Layer Degradation in Polymer Electrolyte Membrane Fuel Cells. Journal of the Electrochemical Society 165(6) , F3271-F3280. 10.1149/2.0291806jes. BMIT-BM Materials
Melli, S. Ali; Wahid, Khan A.; Babyn, Paul; Cooper, David M.L.; Hasan, Ahmed M. et al. (2018). A wavelet gradient sparsity based algorithm for reconstruction of reduced-view tomography datasets obtained with a monochromatic synchrotron-based X-ray source. Computerized Medical Imaging and Graphics 69, 69-81. 10.1016/j.compmedimag.2018.08.005. BMIT-BM Materials
Muirhead, Daniel; Banerjee, Rupak; George, Michael G.; Ge, Nan; Shrestha, Pranay et al. (2018). Liquid water saturation and oxygen transport resistance in polymer electrolyte membrane fuel cell gas diffusion layers. Electrochimica Acta 274, 250-265. 10.1016/j.electacta.2018.04.050. BMIT-BM Materials
Pratt, Isaac V.; Johnston, James D.; Walker, Ernie; Cooper, David M. L. (2018). Interpreting the three-dimensional orientation of vascular canals and cross-sectional geometry of cortical bone in birds and bats. Journal of Anatomy 232(6) , 931-942. 10.1111/joa.12803. BMIT-BM, BMIT-ID Agriculture
Shrestha, Pranay; Banerjee, Rupak; Lee, Jongmin; Ge, Nan; Muirhead, Daniel et al. (2018). Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification. Journal of Power Sources 402, 468-482. 10.1016/j.jpowsour.2018.08.062. BMIT-BM Materials
Abedi, Ali; Dalai, Ajay K. (2017). Study on the quality of oat hull fuel pellets using bio-additives. Biomass and Bioenergy 106, 166-175. 10.1016/j.biombioe.2017.08.024. BMIT-BM Agriculture